+88-01720946080 info@starlabsbd.com, ahnaf@starlabsbd.com
Shop

Labwise®

Rated 0 out of 5
(be the first to review)
Categories: ,
More Info

Description

Labwise® is a powerful and convenient software package for programming, controlling and recording key parameters of high performance baths and circulators in the Grant Optima range; TX150, TXF200 and LT ecocool via a PC.

Labwise® set-up features

  • set temperature
  • set high and low alarms; alarms can be configured to switch a relay
  • set reaction timer
  • set delayed start and stop time
  • control of output relays for refrigeration on/off control and operating ancillary equipment
  • control of pump speed for Grant TXF200 heating circulator

Labwise® programming features

  • set cool or heat time to target
  • program values may be set graphically or numerically
  • up to 30 segments per program
  • set number of loops, 1 to 254 or infinite looping between selected way points
  • programmed control of output relays for each segment, for operating ancillary equipment
  • control of pump speed for Grant TXF200 heating circulator

Labwise® display and logging features

  • display of temperature/time profile on screen in real time
  • real time zoom and scaling of graphical display
  • logging of temperature profiles to disk for storage and subsequent analysis
  • store programs to disk
Get A quote

Downloads

Optional Accessories

Grant Instruments Bridge Plate for Stainless Steel and Plastic Tanks
Bridge Plates
For use with stainless steel and plastic tanks
 
Part No Description
G-BTS Bridge plate fits G Optima heating circulator models to ST5 tank
G-BTL Bridge plate fits G Optima heating circulator models to ST12, 18, 26 & 38 tanks
G-BSS Bridge plate fits G Optima heating circulator models to S5 tanks
G-BSL Bridge plate fits G Optima heating circulator models to S12, 18, 26, 38 tanks
T-BTS Bridge plate replacement fits T Optima heating circulator models to ST5 tank
T-BTL Bridge plate replacement fits T Optima heating circulator models to ST12, 18, 26 & 38 tanks
T-BSS Bridge plate fits T Optima heating circulator models to S5 tank
T-BSL Bridge plate fits T Optima heating circulator models to S12, 18, 26 & 38 tanks
T-BYWS Bridge plate fits T Optima heating circulator models to Y6 & W6 tanks
T-BYWL Bridge plate fits T Optima heating circulator models to Y14, 28 & 38 tanks also W14, 28 & 38 tanks
G-BPS Bridge plate fits G Optima heating circulator models to P5 tank
G-BPL Bridge plate fits G Optima heating circulator models to P12 & 18
T-BPS Bridge plate replacement fits T Optima heating circulator models to P5 tank
T-BPL Bridge plate replacement fits T Optima heating circulator models to P12 & 18 tanks
STL12 Stainless Steel Lid
Lids
To help reduce evaporation / heat loss and avoid sample contamination*
 
Part No Description
STL5 Flat stainless steel lid for 5L bath
STL12 Gabled, hinged (removable) stainless steel lid for 12L bath
STL26 Gabled, hinged (removable) stainless steel lid for 18L and 26L bath
STL38 Gabled, hinged (removable) stainless steel lid for 38L bath
PL5 Flat, stainless steel lid for 5L bath
PL12 Curved plastic lid for 12L bath
PL18 Curved plastic lid for 18L bath
Accessory Notes:

* Between operating temperatures 60ºC and 100ºC and below room temperature a lid or layer of polypropylene spheres should be used.

STL12 Stainless Steel Lid
Lids
To help reduce evaporation / heat loss and avoid sample contamination*
 
Part No Description
STL5 Flat stainless steel lid for 5L bath
STL12 Gabled, hinged (removable) stainless steel lid for 12L bath
STL26 Gabled, hinged (removable) stainless steel lid for 18L and 26L bath
STL38 Gabled, hinged (removable) stainless steel lid for 38L bath
PL5 Flat, stainless steel lid for 5L bath
PL12 Curved plastic lid for 12L bath
PL18 Curved plastic lid for 18L bath
Accessory Notes:

* Between operating temperatures 60ºC and 100ºC and below room temperature a lid or layer of polypropylene spheres should be used.

C1G Accessory Cooling System
Accessory Cooling
Optional accessory cooling systems
 
Part No Description
C1G 0ºC to 40ºC**
C2G -15ºC to 40ºC***
Accessory Notes:

** The cooling coil can be continuously immersed in liquids up to 100ºC with the cooler switched off and may be used to cool liquid down from 100ºC but it is not designed for continuous operation above 40ºC.
*** Minimum operating temperature without accessory cooling is ambient +5ºC (amb.+ 15ºC for P5 and ST5 tanks).

T-CLAMP
Clamp
To attach heating circulators to any vertical sided tank
 
Part No Description
T-CLAMP Allows heating circulator to be attached to virtually any vertical sided vessel with a maximum wall thickness of 35mm for rectangular tanks, 30mm for circular tanks (300mm diameter), and capacity up to 50L
Pump Connectors
Pump Connectors
Optional
 
Part No Description
P-M6 Replacement plastic pump inlet/outlet connector. Fits tubing 9mm inner dia. Temperature range -50 to 200ºC
P-M11 Replacement plastic pump inlet/outlet connector. Fits tubing 15mm inner dia. Temperature range -50 to 200ºC
M-SR4 Metal pump inlet/outlet connector, dual seal super rapid 4mm. Fits semi rigid tubing 4mm outer dia. Temperature range -20 to 100ºC
M-SR6 Metal pump inlet/outlet connector, dual seal super rapid 6mm. Fits semi rigid tubing 6mm outer dia. Temperature range -20 to 100ºC
M-SR8 Metal pump inlet/outlet connector, dual seal super rapid 8mm. Fits semi rigid tubing 8mm outer dia. Temperature range -20 to 100ºC
M-HB7 Metal pump inlet/outlet connector, hose barb 7mm. Fits flexible tubing 7mm inner dia. Temperature range -40 to 120ºC
M-HB9 Metal pump inlet/outlet connector, hose barb 9mm. Fits flexible tubing 9mm inner dia. Temperature range -40 to 120ºC
M-HB12 Metal pump inlet/outlet connector, hose barb 12mm. Fits flexible tubing 12mm inner dia. Temperature range -40 to 120ºC
M-UC Metal pump inlet/outlet plate, 1/4‘‘ BSP/G1/4 female. Temperature range -50 to 200ºC
VR Tube Racks
Racks
To optimise available bath capacity
 
Part No Tube size Capacity
VR-13 Ø10-13 mm 65
VR-19 Ø16-19 mm 36
VR-24 Ø24 mm 23
VR-30 Ø30 mm 14
VR-SE 0.5 ml 102
VR-LE 1.5ml 75
QR-13 Ø10-13 mm 30
QR-19 Ø16-19 mm 16
QR-24 Ø24 mm 10
QR-30 Ø30 mm 5
QR-SE 0.5 ml 44
QR-LE 1.5 m 35
Accessory Notes:

Number of racks accommodated in stainless steel / plastic baths:
5 litres: 1 x QR
12 litres: 2 x VR
18 litres: 4 x VR
26 litres: 4 x VR
38 litres: 6 x VR

RS Raised Shelves
Raised Shelves
To allow accommodation of shallow vessels
 
Part No Description
RS14 For 12L bath
RS22 For 18L bath
RS28 For 26L or 38L bath
RS38 For 38L bath
PS20 Polypropylene Spheres
Polypropylene Spheres
Ideal alternative to a lid*
 
Part No Description Packs per bath
PS-20 Pack of 300 polypropylene spheres 1 x 5/12L, 2 x 18/26L, 3 x 38L
Accessory Notes:

* Between operating temperatures 60ºC and 100ºC and below room temperature a lid or layer of polypropylene spheres should be used.

VTP1 Vertical Turbine Pump
Vertical Turbine Pump
Low noise, compact design. Supplied with pipe connections and special lid for fitting to tanks, pipe bore 12.7mm
 
Part No Description
VTP1-LT Maximum pressure 1000 mbar, Maximum flow 9 L/min
VTP2-LT Maximum pressure 1650 mbar, Maximum flow 12 L/min
Accessory Notes:

Required only where application demands a higher pressure than that delivered by the internal pump to maintain flow

Reviews

There are no reviews yet.

Be the first to review “Labwise®”

Your email address will not be published. Required fields are marked *

Related products

Back To Top